TAC Family Forums

Share your wins, get unstuck, or see how others use the TAC Method to create a fulfilling guitar life!

  • Two Truths and One Lie……

    Posted by TMutter on February 25, 2022 at 4:39 pm

    1) Until 6 months ago I had never changed my own guitar strings
    2) I usually went 3 or 4 years between paying a guitar shop to do maintenance on my Larrivee
    3) I am totally confident now in restringing and performing routine maintenance on my Larrivee L-05E and Martin D41 Custom.

    The patient is ready…… cutters, strings, stainless steel wool, oil, cleaner…… lets go….

    Can you guess the one lie 😆

    TMutter replied 4 years ago 5 Members · 9 Replies
  • 9 Replies
  • Loraine

    Member
    February 25, 2022 at 11:19 pm

    Ha – I had such a fear of changing my strings for the longest time, and then a selfless TACer took time out of their busy life to Zoom with me and walk me through changing the strings on my guitar. Now it’s a piece of cake. I don’t visit the luthier often, but I should probably start of a rotation of guitars with him just to have them checked up on and maintained. I know a couple that need a good set up right now, and I’m too afraid to try anything on my own.

    • Cadgirl

      Member
      February 26, 2022 at 2:25 am

      @Loraine , what do you mean, a good set up?

      • Loraine

        Member
        February 26, 2022 at 10:40 am

        @cadgirl, a good set up for me means having everything checked out and the action being at a low enough level for me to play comfortably and making sure the neck is straight.

      • Cadgirl

        Member
        February 27, 2022 at 3:29 am

        Probably not a bad Idea. Next time I’m at the guitar store I’ll ask how much maintenance is. I do have a small travel guitar that I rarely use. I totally loosened the strings and put it back in it’s case.

  • Cadgirl

    Member
    February 26, 2022 at 2:26 am

    I am going to guess the one lie is steel wool. Good for you to change your own strings. I’ll change mine but I don’t like to.

  • TMutter

    Member
    February 26, 2022 at 7:50 am

    Actually it’s #3😆. I have learned to do it but I still put on Tony’s video to walk me through it. I actually do use a very fine steel wool (almost like cotton) on the fret board and then oil it. I make sure to tape the sound hole first to keep debri from coming in contact with internal pick ups.

  • That_Guy

    Member
    February 26, 2022 at 7:14 pm

    It’s worth polishing the frets every once in a while. I use one of the Music Nomad kits.

    • This reply was modified 4 years ago by  That_Guy.
    • David_Leo

      Member
      February 27, 2022 at 5:14 am

      Yes, this is usually part of a luthier set up.

    • TMutter

      Member
      February 27, 2022 at 9:18 am

      I may have to have a few frets replaced on the Larrivee which is almost 20 years old. They have some pretty good wear on them so that will definitely be done by a pro.

Log in to reply.